Vanishing Art 2014

She Never Married featured

vanishing art both works

 

I’ll be exhibiting these two works at Vanishing Art 2014 sculpture exhibition in Carton House, Kildare.

‘She Never Married’ (on the left) has since taking the above photos finally been inserted into a decent display container, so looks slightly different now in situ.

The Irish Independent wrote of this year’s exhibition:

The free public art exhibit is back for its second year, combining the work of noted artists with a beautiful country setting.

Set in the breathtaking grounds of Maynooth’s luxurious Carton House resort, ‘Vanishing Art’ showcases the work of seminal Irish artists.

Over 70 of the country’s most notable artists including John Behan, Patrick O’Reilly, Ann Meldon and Carolyn Mulholland are currently preparing to display their impressive sculptures and paintings over the course of the exhibition.

It is expected that over 100,000 people will attend the free public event, taking in the 180 spectacular works of art on show.” 

Link to full article here

My works are minuscule in comparison to this giant thorn shaped outdoor sculpture shown being delivered here on Carton House’s twitter feed and will be displayed somewhere inside rather than being exposed to the elements outdoors.

 

 

Screen Shot 2014-09-28 at 3.41.12 PM

 

Further information about the event can be found on the Vanishing Art website www.vanishingart.ie/ and on their facebook page .

Exhibition opens October 1st 2014

The Head

water formed 2

‘The head’ has been a nightmare from beginning to end. Everything that can go wrong has gone wrong with ‘the head’.

I made version 01 of the head from air dry clay…but the clay was so wet that it just collapsed on me looking rather Wicked Witch of the West “I’m meeeelting”

177292_896759360353213_808180134931557548_o 10629483_896759393686543_252104762949191701_o 10700149_896759397019876_5755734916147090243_o 10688156_896759363686546_1955602891872455831_o

So, I let him dry out for a bit, stuffed him with newspapers and fixed the melted mess – below is the next stage images.

10382429_897968803565602_7493944228131348798_o 10626158_897968810232268_5822443049808695008_o 1960943_897968830232266_7688132487413976187_o

After a lot more work I refined the face further down – an artist friend commented that he looked like he was modelled on “a young Ian Paisley”, which he wasn’t, but I could see the resemblance! At this point I was pretty happy with the head. All I needed to do was take the newspaper stuffed inside his head out and construct a neck and shoulders for him…

10443270_899801633382319_8585901463836996027_o 10708694_899801656715650_8293120717246227482_o 10708694_899801656715650_8293120717246227482_o (1) 10633575_899801570048992_2634934711402570759_o

But….as soon as I tried to take the newspaper out, his whole lower jaw literally shattered into dust, leaving only the top part of his head. Someone on my facebook page commented that it looked okay like this and perhaps to leave the head like this and I agreed, despite my bitter disappointment that after all my hard work on this piece that I was stymied in getting it to look exactly how I wanted.

64753_907703319258817_6774288218233412657_n

 

However, the art gods had something else in mind. No sooner than I’d come to terms with having a jawless head, someone gesticulated too closely to it and it too landed on the floor and shattered into a million pieces….the only bit recognisable was the nose. The rest was grey dust – this was because I used an air dry clay with no kind of fibres to help bond the clay particles together and give it any kind of strength. Lesson learned to never, ever use that clay ever again – unless of course I want the end result to turn to a cloud of dust.

Undeterred but with a heavy, heavy heart I resumed work and began a whole new piece, this time from terracotta clay. I preferred the expression on clay head #1, to head #2, but time was against me, as I wanted to get this piece completed and fired in a kiln so that I could then paint it and have it ready in time for an exhibition.

The head below is head #2 and is pictured resting on two briquettes to allow air to circulate inside the hollow form to help it dry out fully (briquettes being compressed peat that you burn in an open fire)

1236174_916021985093617_3750402243135685302_n

 

Unfortunately…days after the above photo was taken, I went to lift the piece and move it and it cracked across the shoulder and then further stalagmites broke off…At that stage I cried. I have never, ever had such difficulty with any piece, even taking into account the fact that using clay on a larger piece like this is something I’m relatively new at. But, I was determined to have the piece I wanted and exhibit it as planned no matter what. Not after all the hard work I’d put into rescuing this piece from a number of disasters already.

head in car

I researched and I asked advice about broken unfired clay and was told to try misting the broken areas with water and then adding slip, allowing to dry and (hopefully) bond together again and then fire in the kiln. I did this, but then the person who said they’d fire the piece for me said they now couldn’t. At this point I just gave up on the whole idea of ever being able to finish the piece completely.

However, in the end I decided, sod it, I’ll paint the unfired piece as is and at least exhibit it. And I’m now glad I didn’t leave the piece at home unshown and broken.

Today I installed him in the exhibition. Below is the finished piece, painted using acrylic paint and varnish and surrounded by real stones in order to embed him further into a more natural setting.

Now that the piece is painted it looks exactly like what I had in mind – that it was formed from centuries of dripping, mineral-saturated water – the piece is based on the Marble Arch Caves in Northern Ireland – made specifically for the Response to Beauty exhibition which is on tomorrow (27th Nov 2014)

water formed 3 water formed 2

water formed

 

Of course…because he’s made from un-fired clay – which cracked again en route to the exhibition space, I have to make a decision what to do with this piece. I’m not sure if I can repair him without him cracking again, and am also unsure about whether firing a painted piece is good for the interior of a kiln or environmentally friendly.

At the end of this whole process I think I’ll take a silicone mould of the head and then cast him in some kind of durable material. I think too, that what all this has taught me is that perhaps making a clay sculpture and then taking a cast from it is perhaps the working method I should follow from now on, rather than trying to create ceramic sculptures that are to be fired.